AM-Series
The AM-30 is a 31-segment 5VDC powered red, green, or amber LED bargraph in a compact DIN case (96x24mm) with a short depth (56.5mm/2.23"). It can be ordered in either a horizontal or vertical format. Single or dual setpoints are available as options. The setpoints are easily adjustable by the user from the front of the meter.
There are seven header selectable input ranges of 50mV, 100mV, 200mV, 1V,5V,10V and 4-20mA. The meter comes standard with a scale of 0 100%, but any required scale and unit of readout can be specially ordered. The meter may also be ordered with a dot mode display option.
The AM-30 uses a 30-pin PCB edge card connector or optionally a Push-OnTM screw terminal connector may be used (see ordering information on page 8). This bargraph is designed especially for use in process applications where a low cost visual analog indication is required.
AM-30/AM-30R1/AM-30R2 with DC Volt Input.
The AM-Series have a matching DIN case style that is complementary to the Lynx, Leopard and Tiger family of meters. AM-Meters are the OEMs choice for economical switchboard and process indication. For economy, each model is dedicated to a specific application and designed for quick and easy installation.
Input Configuration:........Single ended
Full Scale Ranges:..........50mV/100mV/200mV/1V/5V/10V/4-20mA
Input Impedance:.............> 500k for voltage inputs 13 for 4 to 20mA inputs
A/D Converter:.................Flash converter
Accuracy:.........................1% of full scale
Temperature Coefficient:...200ppm/ C (typical)
Warm Up Time:.................Instantly reads to specified accuracy
Conversion Rate:.............Instantaneous flash conversion
Display:.............................Thirty-one 0.20 X 0.06 (5.08mm X
1.52mm) bar segments
Polarity:............................Operates with positive polarity signals only
Power Supply:..................5VDC @ 300mA, 1.5 watt
AM-30/AM-30R1/AM-30R2 with 4 to 20mA Input.
Operating Temperature:..-10 C to 60 C
Storage Temperature:......-20 C to +70 C
Relative Humidity:...........95% (non condensing)
Case Dimensions:...........Bezel: 24X96 mm (0.95 X 3.78)
Depth behind bezel: 56.5 mm (2.23) Plus 27 mm (1.06) for Push-on connector or plus 17.5 mm (0.69) for Edge connector
Weight:..............................90.72 gms (3.2 oz)
136.1 gms (4.8 oz) when packed
AM-Series, the choice for easy user adjustability
AM-30...........Red 31 Seg. Bargraph, 0.05/0.1/0.2/1/5/10VDC/4-20mA AM-30R1...........Red 31 Seg. Bargraph, 1 VDC std w/one 2 A/120 VAC relay
AM-30R2..........Red 31 Seg. Bargraph, 1 VDC std w/two 2 A/120 VAC relays
Texmate is an American manufacturer of high durability industrial grade panel meters, bar graphs, and transducers. Texmate's meters are frequently equipped with relays and various signal outputs for industrial automation applications and are known for their extremely long service life.